Micsig STO1152C Plus Smart Oskilloskooppi

499,00 (Verollinen: 618,76)

Micsig STO1152C Plus Smart Oskilloskooppi

Plus-tuotteiden mukana akku, kantohihna, näytönsuoja ja sarjaväylän dekoodauksen

Varasto loppu

EAN: N/A Tuotetunnus (SKU): STO1152C Plus Osastot: , , , Avainsanat tuotteelle ,


Micsig STO1152C Plus Smart Oskilloskooppi

STO1152C Plus sisältää:

  • akku
  • kantohihna
  • näytönsuoja
  • sarjaväylädekoodaus :CAN, LIN, SPI, I2C, UART
  • HDMI & WiFi (ei sisällä johtoja)
  • Mittapäät 2 kpl
  • Virtamuuntaja
  • Virtapiuha
  • Värilliset BNC suojahatut



Analog channels: 2

Bandwidth: 150MHz

Sample rate: 1GSa/S

Memory depth: 28Mpts

Rise time: ≤2.3ns

Max waveform capture rate: 80,000wfm/s

Bandwidth limitation: 20MHz, High pass, low pass

I/O Port: Wi-Fi, LAN,HDMI, USB Host,  USB Device, DC Power, Aux out

APP: Support Android / iOS

Built-in storage capacity: 8G

Trigger type: Edge, Pulse Width, Logic, Video, Runt, Time Out, N Edge, Slope

Display: 8″ Industry TFT LCD touchable capacitive screen, resolution: 800*600 pixels, 14*10 grids

Automatic measurements: Period, Frequency, Rise Time, Fall Time, Delay, Positive duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Positive Overshoot, Negative Overshoot, Phase, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS

Dimensions: 280*180*50mm

Weight: Oscilloscope body 1425g, battery 320g

Serial bus trigger and decode : UART, CAN, LIN, SPI, I2C,

Serial bus trigger and decode (Options):MIL-STD-1553B and ARINC 429

Battery : 7.4V 7500mAH Lithium battery

STO1000 general introduction

Micsig STO1000 series smart oscilloscopes adopt the innovative operation way, mixing full touch operation, buttons and knobs operation, and both ways mixed, which brings you a new user experience. It is not a traditional bench oscilloscope any more, big capacity lithium is a really good choice in filed using. Up to 28Mpts memory depth and maximum 80,000wfm/s capture rate help you to solve more problems.

As an entry level oscilloscope, STO1000 series is your first choice always.


Easy to install large capacity lithium batteries and robust design, not only for lab, but also for field using

8 inches full touch capacitive screen and high quality button and knobs make the operation more simple and smart

Support APP (iOS and Android ) to remote control oscilloscope

Support Wi-Fi data real-time transmission and HDMI high-definition display

Support video recording and built-in 8G storage capacity

Maximum bandwidth 150 MHz, sampling rate 1GSa/s

Memory depth is up to 28Mpts, 2/4 channels selectable

Waveform capture rate is up to 130,000 frames per second.

Supports 256-level intensity grading and color temperature display


28Mpts memory depth

Up to 28Mpts memory depth, Zoom into a selected part of the captured waveforms to get more details

Maximum 80,000wfm/s capture rate. by increasing the waveform capture rate, you see a more complete picture of what is going on with the signal.

Support serial triggering and decode (I2C, SPI, RS232/UART,CAN, LIN) and Aerospace and defence (MIL-STD 1553, ARINC 429). Two formats to display decoding, text and graphic.

31 automatic measurements. Various automatic measurements can meet different measurement demand. It can be display all in one page.

Built in 8G storage and unique file management system.

Support video record, quick save, screen shot, one button fast operation

The pictures name are 8G+= ( four small pictures in one page ), It includes 8G storage+bottom menu fast operation+file management+quick save

Wi-Fi, HDMI, Wi-Fi. LAN,app, pc software

Unique oscilloscope mobile APP and PC software via Wi-Fi, USB, Wi-Fi LAN and LAN connection,

Support transfer data from scope to PC via Wi-Fi and USB

Support Micro HDMI to connect scope and display directly.[:]