Kuvaus

Tekbox TBL5016-3 50µH 16A LISN keinoverkko

3-vaihe testaus

The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard.

The device is designed for testing 3-phase and single-phase, AC-powered equipment with supply voltages up to a maximum 450V/260V and 16A. Conducted noise can be measured on each phase and on the neutral conductor. The TBL5016-3 has separate RF outputs for each phase and neutral and consequently can be coupled with the TBLM1 to split the emissions in its common mode and differential mode components.

The single-phase DUT socket is available in country-specific variants.

Specifications

• Frequency range: 9 kHz to 30 MHz
• Impedance: 50 Ω ║ (50 µH + 5 Ω)
• Artificial hand: 220 pF + 511 Ω
• Switchable PE: 50 Ω ║ 50 µH
• 250µH pre-filter
• Separate RF outputs for each line and neutral
• Air core inductors
• Line voltage: max. 540V/260V / 50 – 60 Hz, CAT ‖‖
• Max. current per line and neutral: 16A @ 23°C each
• 3-phase DUT socket: CEE/IEC60309, 3L+N+PE, 16A, female
• Single-phase DUT socket: country specific
• Power connector: CEE/IEC60309, 3L+N+PE, 16A, male
• Measurement connectors: 50 Ω BNC
• Operating Temperature Range: +5°C … + 40°C; 5% to 80% RH
• Safety: Safety Class I, IEC 1010-01

Documentation

TBL5016-3 50µH LISN User Manual

Tähän tuotteeseen sopivat oheistuotteet

3-vaihe piuha

• TBPC- IEC60309-3m $39⁰⁰
• TBPC- IEC60309-5m $54⁰⁰
• TBPC- IEC60309-10m $89⁰⁰

Käytä tämän laitteen kanssa TekBox TBFL1  transientti rajoitin / vaimennin / ylipäästösuodinta, niin et hajoita kallista spektrianalysaattoria.

TBL5016-2_LISN-Manual

Which_standard_has_to_be_applied_for_my_product

Pre-Compliance_Conducted_Emission_Measurements

EMC_pre_compliance_testing

Application note Conducted Noise_Measurement_with the Rigol_EMI software_S1210[:]