TekBox EMCView PC-ohjelmalisenssin päivitys



TekBox EMCView PC-ohjelmalisenssin päivitys

EMC-testauksen PC-lisenssin päivitys EMCView Standardista PRO-versioon.

EMCView toimii:

  • Rigol DSA- ja RSA-
  • Siglent SSA-, SSA Plus- ja  SVA-

spektrianalysaattoreissa, kun EMI-optio on asennettu.

Kokeile, ennen kuin ostat. Lataa EMCview  ilmainen demoversio. Toimii ilman lisenssiä 10MHz asti (https://www.tekbox.com/product/EMCview.zip)

Huom! EMCView toimii kokonaisuudessaan vasta, kun spektrianalysaattorin EMI-optio (EMI suodatin & vuotava huippuarvoilmaisin -lisenssi) on aktivoitu.

HUOM! Asennusohjelmia on kahta tyyppiä:

  1. Analysaattorisidonnainen: Lähetä tilauksessa spektrianalysaattorisi sarjanumero kommenttikentässä. Ohjelma on silloin laitekohtainen eli toimii vain tälle spekrianlysaattorille. Voit asentaa EMCView-ohjelman usealle PC-koneelle.
  2. PC-sidonnainen: Vaihtoehtoisesti voit määritellä ohjelman PC-kohtaiseksi. Ohjelman voi asentaa vain kerran ja se on sidottu asennettuun PC-tietokoneeseen. Spektrianalysaattoreita voi olla useita. Lisenssin saamiseksi sinun pitää asentaa EMCView-ohjelma ja ilmoittaa meille Host-tilaus kommenttikentässä. Katso kuva.
Tekbox EMCView Host
Yläkuva: Tekbox EMCView Host

Ilmoita spektrianalysaattorin sarjanumero tai Host# tilauslomakkeen kommenttikentässä.

Saat sähköpostilla EMCView-ohjelman lisenssitiedoston, joka pitää asentaa samaan hakemistoon, missä EMCView.exe on.

EMCView PC Software for EMC Pre-Compliance Testing

The Tekbox EMC compliance software EMCview for PCs is a user-friendly EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using our LISNs, RF current probes, measurement antennas and TEM Cells.

A built-in amplitude correction enables correction and conversion coefficients for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, filters and any other component in the signal chain.

There is no need for a time-consuming setup. The SW is ready for measurements straight after installation. All emission related standards and a few automotive manufacturer standards are pre-configured in corresponding project files. The project files take care of all necessary settings to conduct standard compliant measurements. Besides using pre-configured projects, the user can easily create his own projects using a built in editor or any simple text editor.

The graph supports two complete measurement runs such as for example Average / Quasi-Peak or Peak / Quasi Peak and in addition a fast Quasi-Peak scan of critical peaks. Graphs can be saved and overlayed with newer measurements to track and document design modifications.

Furthermore, EMCview together with our GPS receiver can be used to carry out RF-coverage measurements. An export feature creates KML files which links the result to google maps.
Immunity testing is supported with dedicated menus, controlling the tracking generator of the spectrum analyzer.

EMCview PRO, offers real-time measurement support for spectrum analyzers with real-time capability. Furthermore, EMCview PRO offers advanced conducted immunity testing features for spectrum analyzers with tracking generators. The customer can select between a standard EMCview license or EMCview PRO. Users with a standard EMCview license have the option to upgrade to EMCview Pro.

EMCview currently supports the following spectrum analyzers

  • Rigol (DSA and RSA)
  • Siglent (SSA/SSA plus/SSA -R and SVA) Siglent EUSiglent USA
  • R&S (FPC and FPH)
  • OWON XSA, HSA and NSA series
  • Teledyne Test Tools T3SA series
  • BK Precision 2683 series
  • ComPower SPA-900TG series
  • Multicomp MP700xyz series
  • TheEMCShop ESA series
  • UNI-T UTS series

The spectrum analyzer should be equipped with the EMI option.

Tekbox offers two license options:

  • Analyzer-coupled – the license is coupled to the serial number of the spectrum analyzer. It can be installed on any number of PCs, but it can only control one dedicated spectrum analyzer
  • PC-coupled: the license is coupled to the Host ID of the PC. It can control any of the supported spectrum analyzer models, but it can only be installed on one dedicated PC.

One license is valid for one spectrum analyzer or one PC.

For PC licenses we require the Host ID of your Windows PC.

Download EMCview from our website, copy it into any directory of your desired PC, e.g. C:EMCview and run the exe-file to install it. Then run EMCview and open the ABOUT / About menu and there you can find the ID in the Host # line. 

Please send the serial number of your spectrum analyzer or the Host ID in the comment box.

NOTE: Software limitation without a license: the measurement is limited to the frequency range below 10MHz


  • numerous pre-configured project files for all relevant EMC standards
  • Graph supports two complete measurement runs, same as in test house; simultaneous measurement with two detectors available for a few analyzers
  • fast Quasi-Peak scan of critical peaks, immune to frequency drift of the selected peaks
  • Fast pre-scan
  • configurable limit lines and segment files
  • configurable correction files for cables, LISN, amplifiers, antennas, current probes, etc.
  • configurable margins for the identification and selection of critical peaks
  • supports import and overlaying of reference measurements for comparison purpose
  • linear or logarithmic frequency axis
  • Harmonic markers
  • automatic creation of test reports
  • many import/export-functions
  • graphs can be saved as charts containing meta-data, graphs can be loaded together with the corresponding measurement configuration
  • RF coverage measurements
  • tracking generator control for immunity testing using TEM cells
  • many post-processing features
  • useful calculators
  • Everything the standard version offers
  • Immunity testing using CDNs or BCI probes
  • Rapid measurement, supporting real time bandwidth capability of Siglent SSA3000X-R series and Rigol RSA series


  • in house measurement of EMC behavior during product design phase
  • EMC training in lab, school and university
  • pre-compliance test of products before submitting it to the test house
  • test-cost reduction
  • reduced time to market


Lisätietoja TekBoxin sivuilta.

Katso Tekbox EMCView Standard ja EMCView PRO.



TBGPS1 GPS RECEIVER (katso tuotesivu)

The TBGPS1 is a universal GPS Receiver providing NMEA data over a USB Virtual COM Port. It was designed primarily to be used for RF coverage measurements together with a Spectrum Analyzer and the EMCview software of Tekbox.


  • Autonomous / assisted GPS receiver
  • Built in LNA for high sensitivity
  • 32 channel acquisition,
  • 12 channel tracking
  • 2 channel capable SBAS
  • -161 dBm sensitivity in acquisition under hot start mode and in tracking mode
  • Fast time to first fix Hot start outdoor: <1 sec @ -130 dBm, indoor: 6 sec @ -150 dBm. Warm Start -33 sec @ -130 dBm, Cold
  • Start: 33 sec typ @ -130 dBm
  • Accuracy of 1.3m outdoor (CEP 50%) and 12.5m (CEP 50%) indoor
  • Operating Temperature Range: -40°C … + 85°C; 5% to 85% RH


  • General purpose GPS receiver
  • RF coverage measurement with EMCview





Analysaattori, PC