[:en]Rigol DP821 Dual Output, 140W, 60V, 10A DC Power Supply[:fi]Rigol DP821 140W, 2 ulostuloa, 60V, 10A laboratorioteholähde[:]

549,00 (Verollinen: 680,76)

Vain 1 varastossa (voidaan jälkitoimittaa)

EAN: N/A Tuotetunnus (SKU): DP821 Osastot: , Avainsanat tuotteelle , , ,

Kuvaus

[:en]

Rigol DP821 Dual Output, 140 Watt , 60V, 10A DC Power Supply

DP821 features:

  • 2 Outputs; total power up to 140W
  • Low Ripple Noise <350 uVrms/2mVpp
  • Fast transient response time: <50 us
  • Up to 10A or 60 V
  • OVP/OCP/OTP protection functions
  • Built in V, A, W measurements and waveform display
  • Optional output Delay, Analysis, Monitor, and Trigger functions
  • 3.5 inch TFT Display
  • Connectivity including USB Host & Device with LXI option
Model DP821
Channels 2
DC Output (0°C to 40°C )
Voltage/current CH1: 0 to 8 V, 0 to 10 A

CH2: 0 to 60 V, 0 to 1 A

OVP/OCP CH1: 0.1 to 8.8 V, 0.1 to 10.5 A

CH2: 0.1 to 66 V, 0.1 to 1.1 A

Load Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Linear Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage <350μVrms/2mVpp
Normal Mode Current <2mArms
Common Mode Current Not specified
Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)
Programming Voltage CH1: 0.1% + 25mV
CH2: 0.05% + 10mV
Current 0.2% + 10mA
Readback Voltage CH1: 0.1% + 25mV
CH2: 0.05% + 5mV
Current 0.15% + 10mA
Resolution
Programming Voltage CH1: 10mV
CH2: 10mV
Current CH1: 1mA
CH2: 10mA
Readback Voltage CH1: 10mV
CH2: 10mV
Current CH1: 1mA
CH2: 10mA
Display Voltage CH1: 10mV
CH2: 10mV
Current CH1: 1mA
CH2: 10mA
Transient Response Time
Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
Command Processing Time [2]
<118ms
Temperature Coefficient per degree C (Output Percentage + Offset)
Voltage 0.01%+3mV
Current 0.02%+3mA
Stability [3] ±(Output Percentage + Offset)
Voltage 0.02%+1mV
Current 0.1%+1mA

[:fi]

Rigol DP821 DC teholähde, 2 ulostuloa, 140W, 60V, 10A laboratorioteholähde

DP821 ominaisuudet: Säädettävä teholähde: Säädettävä jännitelähde(säädettävä virtalähde): 60V (1A) + 8V (10A)

  • 2 ulostuloa; Maksimi teho 140W
  • 0 – 60V (1A) & 0 – 8V (10A)
  • Matala (Ripple) kohina  <350 uVrms/2mVpp
  • Nopea vasteaika: <50 us
  • Jopa 10A tai 60V
  • ylijännitesuoja(OVP)/virtasuoja(OCP)/lämpösuoja(OTP) funktiot
  • Sisäänrakennetut V, A, W mittaukset ja aaltomuodon  näyttö
  • Optioina lähdon viive, analysointi, monitorointi ja liipaisinfunktiot
  • 3.5 tuuman TFT-näyttö
  • Liitännät: USB

Saatavat optiot(Nämä ovat vakiona DP821A-mallissa)

  • Tarkka sisäänrakennetut V, A, W mittaukset(0,1 mA ja 0,1 mV) ja aaltomuodon  näyttö (1 mA ja 1 mV) (HIRES-DP800) 89€
  • Lähdon viive, analysointi, monitorointi ja esivalintafunktiot (AFK-DP800) 89€
  • Liitännät: RS-232 ja LAN (INTERFACE-DP800) 119€
  • Digitaalinen IO (DIGITALIO-DP800) 89€
Model DP821
Channels 2
DC Output (0°C to 40°C )
Voltage/current CH1: 0 to 8 V, 0 to 10 A

CH2: 0 to 60 V, 0 to 1 A

OVP/OCP CH1: 0.1 to 8.8 V, 0.1 to 10.5 A

CH2: 0.1 to 66 V, 0.1 to 1.1 A

Load Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Linear Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage <350μVrms/2mVpp
Normal Mode Current <2mArms
Common Mode Current Not specified
Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)
Programming Voltage CH1: 0.1% + 25mV
CH2: 0.05% + 10mV
Current 0.2% + 10mA
Readback Voltage CH1: 0.1% + 25mV
CH2: 0.05% + 5mV
Current 0.15% + 10mA
Resolution
Programming Voltage CH1: 10mV
CH2: 10mV
Current CH1: 1mA
CH2: 10mA
Readback Voltage CH1: 10mV
CH2: 10mV
Current CH1: 1mA
CH2: 10mA
Display Voltage CH1: 10mV
CH2: 10mV
Current CH1: 1mA
CH2: 10mA
Transient Response Time
Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
Command Processing Time [2]
<118ms
Temperature Coefficient per degree C (Output Percentage + Offset)
Voltage 0.01%+3mV
Current 0.02%+3mA
Stability [3] ±(Output Percentage + Offset)
Voltage 0.02%+1mV
Current 0.1%+1mA

[:]

Saatat myös pitää...