[:en]Rigol DP811A Single output, 200 W, 40V, 10A DC Power Supply[:fi]Rigol DP811A 200W, yksi ulostulo, 40V, 10A laboratorioteholähde[:]

679,00 (Verollinen: 841,96)

[:en]Coming to stock 11. November 2017[:fi]2 vaihtoehtoista ulostuloa; Maksimi teho 200W[:]

Vain 1 varastossa (voidaan jälkitoimittaa)

EAN: N/A Tuotetunnus (SKU): DP811A Osastot: , , Avainsanat tuotteelle , , , , , ,

Kuvaus

[:en]

Rigol DP811A Single output, dual range 200 W power supply

DP811A features.
  • 2 Ranges; total power up to 200W
  • Low Ripple Noise <350 uVrms/2mVpp
  • Fast transient response time: <50 us
  • Up to 10A or 40 V
  • OVP/OCP/OTP protection functions
  • Built in V, A, W measurements and waveform display
  • Support for output Delay, Analysis, Monitor, and Preset functions
  • 3.5 inch TFT Display
  • Connectivity including USB Host & Device, LAN, and Digital IO

DP800_UserManual_EN

DP800_DataSheet_EN

Model DP811A
Channels 1
DC Output (0°C to 40°C )
Voltage/current 0 to 20 V/ 0 to 10 A (Low Range) or

0 to 40 V/0 to 5 A (High Range)

OVP/OCP 0.1 V to 22 V or

0.1 V to 44 V

Load Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Linear Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage <350μVrms/2mVpp
Normal Mode Current <2mArms
Common Mode Current

Not specified

Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)
Programming Voltage 0.05% + 10mV
Current 0.1% + 10mA
Readback Voltage 0.05% + 10mV
Current 0.1% + 10mA
Resolution
Programming Voltage 1mV
Current 0.5mA
Readback Voltage 0.1mV
Current 0.1mA
Display Voltage 1mV
Current 1mA
Transient Response Time
Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
Command Processing Time [2]
<118ms
Temperature Coefficient per? (Output Percentage + Offset)
Voltage 0.01%+3mV
Current 0.02%+3mA
Stability [3] ±(Output Percentage + Offset)
Voltage 0.02%+1mV
Current 0.1%+1mA

[:fi]

Rigol DP811A yksi ulostulo, 200W, 40V, 10A laboratorioteholähde

DP811A ominaisuudet: Säädettävä teholähde: Säädettävä jännitelähde(säädettävä virtalähde): 20V (10A) tai 40V (5A)

  • 2 vaihtoehtoista ulostuloa; Maksimi teho 200W
  • Matala (Ripple) kohina  <350 uVrms/2mVpp
  • Nopea vasteaika: <50 us
  • Jopa 10A tai 40V
  • ylijännitesuoja(OVP)/virtasuoja(OCP)/lämpösuoja(OTP) funktiot
  • Sisäänrakennetut V, A, W mittaukset ja aaltomuodon  näyttö
  • Optioina lähdon viive, analysointi, monitorointi ja esivalintafunktiot
  • 3.5 tuuman TFT-näyttö
  • Liitännät: USB

A-malliin tulee nämä ominaisuudet vakiona

  • Tarkka sisäänrakennetut V, A, W mittaukset(0,1 mA ja 0,1 mV) ja aaltomuodon  näyttö (1 mA ja 1 mV) (HIRES-DP800)
  • Lähdon viive, analysointi, monitorointi ja esivalintafunktiot (AFK-DP800)
  • Liitännät: RS-232 ja LAN (INTERFACE-DP800)
  • Digitaalinen IO (DIGITALIO-DP800)

DP800_UserManual_EN

DP800_DataSheet_EN

DP811A speksit

Model DP811A
Channels 1
DC Output (0°C to 40°C )
Voltage/current 0 to 20 V/ 0 to 10 A (Low Range) or

 

0 to 40 V/0 to 5 A (High Range)

OVP/OCP 0.1 V to 22 V or

0.1 V to 44 V

Load Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Linear Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage <350μVrms/2mVpp
Normal Mode Current <2mArms
Common Mode Current

Not specified

Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)
Programming Voltage 0.05% + 10mV
Current 0.1% + 10mA
Readback Voltage 0.05% + 10mV
Current 0.1% + 10mA
Resolution
Programming Voltage 1mV
Current 0.5mA
Readback Voltage 0.1mV
Current 0.1mA
Display Voltage 1mV
Current 1mA
Transient Response Time
Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
Command Processing Time [2]
<118ms
Temperature Coefficient per? (Output Percentage + Offset)
Voltage 0.01%+3mV
Current 0.02%+3mA
Stability [3] ±(Output Percentage + Offset)
Voltage 0.02%+1mV
Current 0.1%+1mA

[:]

Saatat myös pitää...